arxmliv
arxmliv build tool
 
KWARC group
LaTeXML
About
   
 

Back to Homepage

--- /arXMLiv/repos/arXMLiv/trunk/sty/Nreport.cls	2010-04-02 17:27:48.000000000 +0200
+++ /arXMLiv/repos/arXMLiv/trunk/sty/ieeemag.cls	2010-04-01 13:52:15.000000000 +0200
@@ -1,78 +1,36 @@
 %%
-%% This is file `Nreport.cls',
-%% generated with the docstrip utility.
+%% This is file `ieeemag.cls',
+%% generated after the modification of the article.cls provided
+%% with the MikTeX distribution.
 %%
-%% The original source files were:
-%%
-%% classes.dtx  (with options: `report')
-%%
-%% This is a generated file.
-%%
-%% Copyright 1993 1994 1995 1996 1997
-%% The LaTeX3 Project and any individual authors listed elsewhere
-%% in this file.
-%%
-%% For further copyright information, and conditions for modification
-%% and distribution, see the file legal.txt, and any other copyright
-%% notices in this file.
-%%
-%% This file is part of the LaTeX2e system.
-%% ----------------------------------------
-%%   This system is distributed in the hope that it will be useful,
-%%   but WITHOUT ANY WARRANTY; without even the implied warranty of
-%%   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-%%
-%%   For error reports concerning UNCHANGED versions of this file no
-%%   more than one year old, see bugs.txt.
-%%
-%%   Please do not request updates from us directly.  Primary
-%%   distribution is through the CTAN archives.
-%%
-%%
-%% IMPORTANT COPYRIGHT NOTICE:
 %%
-%% You are NOT ALLOWED to distribute this file alone.
+%% The file `ieeemag.cls' was created by Dimitrios Katsaros to
+%% suuport submissions to IEEE Magazines. It is still under development.
 %%
-%% You are allowed to distribute this file under the condition that it
-%% is distributed together with all the files listed in manifest.txt.
 %%
-%% If you receive only some of these files from someone, complain!
-%%
-%%
-%% Permission is granted to copy this file to another file with a
-%% clearly different name and to customize the declarations in that
-%% copy to serve the needs of your installation, provided that you
-%% comply with the conditions in the file legal.txt.
-%%
-%% However, NO PERMISSION is granted to generate or to distribute a
-%% modified version of this file under its original name.
-%%
-%% You are NOT ALLOWED to change this file.
-%%
-%%
-%% MODIFICATION ADVICE:
-%%
-%% If you want to customize this file, it is best to make a copy of
-%% the source file(s) from which it was produced.  Use a different
-%% name for your copy(ies) and modify the copy(ies); this will ensure
-%% that your modifications do not get overwritten when you install a
-%% new release of the standard system.  You should also ensure that
-%% your modified source file does not generate any modified file with
-%% the same name as a standard file.
-%%
-%% You can then easily distribute your modifications by distributing
-%% the modified and renamed copy of the source file, taking care to
-%% observe the conditions in legal.txt; this will ensure that other
-%% users can safely use your modifications.
+%% The original source files were:
 %%
-%% You will also need to produce your own, suitably named, .ins file to
-%% control the generation of files from your source file; this file
-%% should contain your own preambles for the files it generates, not
-%% those in the standard .ins files.
+%% classes.dtx  (with options: `article')
 %%
-%% The names of the source files used are shown above.
+%% This is a generated file.
 %%
+%% --------------------------------------------------------------
 %%
+%% It may be distributed and/or modified under the
+%% conditions of the LaTeX Project Public License, either version 1.2
+%% of this license or (at your option) any later version.
+%% The latest version of this license is in
+%%    http://www.latex-project.org/lppl.txt
+%% and version 1.2 or later is part of all distributions of LaTeX
+%% version 1999/12/01 or later.
+%%
+%% This file may only be distributed together with a copy of the LaTeX
+%% base system. You may however distribute the LaTeX base system without
+%% such generated files.
+%%
+%% The list of all files belonging to the LaTeX base distribution is
+%% given in the file `manifest.txt'. See also `legal.txt' for additional
+%% information.
 %%
 %% \CharacterTable
 %%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
@@ -90,14 +48,12 @@
 %%   Grave accent  \`     Left brace    \{     Vertical bar  \|
 %%   Right brace   \}     Tilde         \~}
 \NeedsTeXFormat{LaTeX2e}[1995/12/01]
-\ProvidesClass{report}
-              [1997/10/10 v1.3x
- Standard LaTeX document class]
+\ProvidesClass{ieeemag}
+              [2003/03/30 v1. Created by Dimitrios Katsaros to support IEEE Magazine submissions]
 \newcommand\@ptsize{}
 \newif\if@restonecol
 \newif\if@titlepage
-\@titlepagetrue
-\newif\if@openright
+\@titlepagefalse
 \if@compatibility\else
 \DeclareOption{a4paper}
    {\setlength\paperheight {297mm}%
@@ -141,11 +97,6 @@
 \if@compatibility\else
 \DeclareOption{notitlepage}{\@titlepagefalse}
 \fi
-\if@compatibility
-\else
-\DeclareOption{openright}{\@openrighttrue}
-\DeclareOption{openany}{\@openrightfalse}
-\fi
 \if@compatibility\else
 \DeclareOption{onecolumn}{\@twocolumnfalse}
 \fi
@@ -162,8 +113,9 @@
       }%
    \renewcommand\newblock{\par}}%
 }
-\ExecuteOptions{letterpaper,10pt,oneside,onecolumn,final,openany}
+\ExecuteOptions{letterpaper,10pt,oneside,onecolumn,final}
 \ProcessOptions
+\RequirePackage{pifont}
 \input{size1\@ptsize.clo}
 \setlength\lineskip{1\p@}
 \setlength\normallineskip{1\p@}
@@ -188,37 +140,41 @@
       \def\@evenhead{\thepage\hfil\slshape\leftmark}%
       \def\@oddhead{{\slshape\rightmark}\hfil\thepage}%
       \let\@mkboth\markboth
-    \def\chaptermark##1{%
+    \def\sectionmark##1{%
       \markboth {\MakeUppercase{%
-        \ifnum \c@secnumdepth >\m@ne
-            \@chapapp\ \thechapter. \ %
-        \di
-        ##1}}{}}%
-    \ded\sectionmark##1{%
-      \markright {\MakeUppercase{%
         \ifnum \c@secnumdepth >\z@
-          \thesection. \ %
+          \thesection\quad
+        \fi
+        ##1}}{}}%
+    \def\subsectionmark##1{%
+      \markright{%
+        \ifnum \c@secnumdepth >\@ne
+          \thesubsection\quad
         \fi
-        ##1}}}}
+        ##1}}}
 \else
   \def\ps@headings{%
     \let\@oddfoot\@empty
     \def\@oddhead{{\slshape\rightmark}\hfil\thepage}%
     \let\@mkboth\markboth
-    \def\chaptermark##1{%
-      \markright {\MakeUppercase{%
-        \ifnum \c@secnumdepth >\m@ne
-            \@chapapp\ \thechapter. \ %
-        \fi
-        ##1}}}}
+    %\def\sectionmark##1{%
+                        %\markright {\sf\MakeUppercase{
+                                                       %\ifnum \c@secnumdepth >\m@ne
+                                                         %\thesection\quad
+                                                       %\fi
+                                                       %##1
+                                                     %}
+                                   %}
+                        %}
+}   %\ps@headings close here.
 \fi
 \def\ps@myheadings{%
     \let\@oddfoot\@empty\let\@evenfoot\@empty
     \def\@evenhead{\thepage\hfil\slshape\leftmark}%
     \def\@oddhead{{\slshape\rightmark}\hfil\thepage}%
     \let\@mkboth\@gobbletwo
-    \let\chaptermark\@gobble
     \let\sectionmark\@gobble
+    \let\subsectionmark\@gobble
     }
   \if@titlepage
   \newcommand\maketitle{\begin{titlepage}%
@@ -228,6 +184,7 @@
   \null\vfil
   \vskip 60\p@
   \begin{center}%
+    {\small [Draft article]}% For IEEE magazines submissions
     {\LARGE \@title \par}%
     \vskip 3em%
     {\large
@@ -257,12 +214,10 @@
 \newcommand\maketitle{\par
   \begingroup
     \renewcommand\thefootnote{\@fnsymbol\c@footnote}%
-
-\def\@makefnmark{\noindent\rlap{\@textsuperscript{\noindent\normalfont\@thefnmar
-k}}}%
+    \def\@makefnmark{\rlap{\@textsuperscript{\normalfont\@thefnmark}}}%
     \long\def\@makefntext##1{\parindent 1em\noindent
             \hb@xt@1.8em{%
-                \hss\@textsuperscript{\noindent\normalfont\@thefnmark}}##1}%
+                \hss\@textsuperscript{\normalfont\@thefnmark}}##1}%
     \if@twocolumn
       \ifnum \col@number=\@ne
         \@maketitle
@@ -291,10 +246,11 @@
 }
 \def\@maketitle{%
   \newpage
-  \null
+  %\null %Sets the vertical space between the header and the beginning of the TITLE.
   \vskip 2em%
   \begin{center}%
   \let \footnote \thanks
+    {\sf \small [Draft article] \par}% For IEEE magazines submissions
     {\LARGE \@title \par}%
     \vskip 1.5em%
     {\large
@@ -302,137 +258,74 @@
       \begin{tabular}[t]{c}%
         \@author
       \end{tabular}\par}%
-    \vskip 1em%
+    %\vskip 1em%
     {\large \@date}%
   \end{center}%
   \par
-  \vskip 1.5em}
+  %\vskip 1.5em
+  }
 \fi
-\newcommand*\chaptermark[1]{}
-\setcounter{secnumdepth}{2}
+\setcounter{secnumdepth}{-1}  %Turn off numbering of the headings.
 \newcounter {part}
-\newcounter {chapter}
-\newcounter {section}[chapter]
+\newcounter {section}
 \newcounter {subsection}[section]
 \newcounter {subsubsection}[subsection]
 \newcounter {paragraph}[subsubsection]
 \newcounter {subparagraph}[paragraph]
 \renewcommand \thepart {\@Roman\c@part}
-\renewcommand \thechapter {\@arabic\c@chapter}
-\renewcommand \thesection {\thechapter.\@arabic\c@section}
+\renewcommand \thesection {\@arabic\c@section}
 \renewcommand\thesubsection   {\thesection.\@arabic\c@subsection}
 \renewcommand\thesubsubsection{\thesubsection .\@arabic\c@subsubsection}
 \renewcommand\theparagraph    {\thesubsubsection.\@arabic\c@paragraph}
 \renewcommand\thesubparagraph {\theparagraph.\@arabic\c@subparagraph}
-\newcommand\@chapapp{\chaptername}
 \newcommand\part{%
-  \if@openright
-    \cleardoublepage
-  \else
-    \clearpage
-  \fi
-  \thispagestyle{plain}%
-  \if@twocolumn
-    \onecolumn
-    \@tempswatrue
-  \else
-    \@tempswafalse
-  \fi
-  \null\vfil
+   \if@noskipsec \leavevmode \fi
+   \par
+   \addvspace{4ex}%
+   \@afterindentfalse
   \secdef\@part\@spart}

 \def\@part[#1]#2{%
-    \ifnum \c@secnumdepth >-2\relax
+    \ifnum \c@secnumdepth >\m@ne
       \refstepcounter{part}%
       \addcontentsline{toc}{part}{\thepart\hspace{1em}#1}%
     \else
       \addcontentsline{toc}{part}{#1}%
     \fi
-    \markboth{}{}%
-    {\centering
-     \interlinepenalty \@M
-     \normalfont
-     \ifnum \c@secnumdepth >-2\relax
-       \huge\bfseries \partname~\thepart
-       \par
-       \vskip 20\p@
-     \fi
-     \Huge \bfseries #2\par}%
-    \@endpart}
-\def\@spart#1{%
-    {\centering
+    {\parindent \z@ \raggedright
      \interlinepenalty \@M
      \normalfont
-     \Huge \bfseries #1\par}%
-    \@endpart}
-\def\@endpart{\vfil\newpage
-              \if@twoside
-                \null
-                \thispagestyle{empty}%
-                \newpage
-              \fi
-              \if@tempswa
-                \twocolumn
-              \fi}
-\newcommand\chapter{\if@openright\cleardoublepage\else\clearpage\fi
-                    \thispagestyle{plain}%
-                    \global\@topnum\z@
-                    \@afterindentfalse
-                    \secdef\@chapter\@schapter}
-\def\@chapter[#1]#2{\ifnum \c@secnumdepth >\m@ne
-                         \refstepcounter{chapter}%
-                         \typeout{\@chapapp\space\thechapter.}%
-                         \addcontentsline{toc}{chapter}%
-                                   {\protect\numberline{\thechapter}#1}%
-                    \else
-                      \addcontentsline{toc}{chapter}{#1}%
-                    \fi
-                    \chaptermark{#1}%
-                    \addtocontents{lof}{\protect\addvspace{10\p@}}%
-                    \addtocontents{lot}{\protect\addvspace{10\p@}}%
-                    \if@twocolumn
-                      \@topnewpage[\@makechapterhead{#2}]%
-                    \else
-                      \@makechapterhead{#2}%
-                      \@afterheading
-                    \fi}
-\def\@makechapterhead#1{%
-  \vspace*{50\p@}%
-  {\parindent \z@ \raggedright \normalfont
     \ifnum \c@secnumdepth >\m@ne
-        \huge\bfseries \@chapapp\space \thechapter
+       \Large\bfseries \partname~\thepart
         \par\nobreak
-        \vskip 20\p@
     \fi
-    \interlinepenalty\@M
-    \Huge \bfseries #1\par\nobreak
-    \vskip 40\p@
-  }}
-\def\@schapter#1{\if@twocolumn
-                   \@topnewpage[\@makeschapterhead{#1}]%
-                 \else
-                   \@makeschapterhead{#1}%
-                   \@afterheading
-                 \fi}
-\def\@makeschapterhead#1{%
-  \vspace*{50\p@}%
+     \huge \bfseries #2%
+     \markboth{}{}\par}%
+    \nobreak
+    \vskip 3ex
+    \@afterheading}
+\def\@spart#1{%
   {\parindent \z@ \raggedright
-    \normalfont
     \interlinepenalty\@M
-    \Huge \bfseries  #1\par\nobreak
-    \vskip 40\p@
-  }}
+     \normalfont
+     \huge \bfseries #1\par}%
+     \nobreak
+     \vskip 3ex
+     \@afterheading}
 \newcommand\section{\@startsection {section}{1}{\z@}%
                                    {-3.5ex \@plus -1ex \@minus -.2ex}%
-                                   {2.3ex \@plus.2ex}%
+                                   {0.1\baselineskip}
+                                   %{2.3ex \@plus .2ex}%
                                    {\normalfont\Large\bfseries}}
 \newcommand\subsection{\@startsection{subsection}{2}{\z@}%
-                                     {-3.25ex\@plus -1ex \@minus -.2ex}%
-                                     {1.5ex \@plus .2ex}%
+                                     {-1.5ex \@plus -1ex \@minus -.2ex}%
+                                     {0.1\baselineskip}
+                                     %{1.5ex \@plus .2ex}%
                                      {\normalfont\large\bfseries}}
-\newcommand\subsubsection{\@startsection{subsubsection}{3}{\z@}%
-                                     {-3.25ex\@plus -1ex \@minus -.2ex}%
-                                     {1.5ex \@plus .2ex}%
+\newcommand\subsubsection{\@startsection{paragraph}{4}{\z@}%
+                                    %{3.25ex \@plus1ex \@minus.2ex}%
+                                    {0.3\baselineskip}
+                                    {-1ex}%
                                      {\normalfont\normalsize\bfseries}}
 \newcommand\paragraph{\@startsection{paragraph}{4}{\z@}%
                                     {3.25ex \@plus1ex \@minus.2ex}%
@@ -442,6 +335,7 @@
                                        {3.25ex \@plus1ex \@minus .2ex}%
                                        {-1em}%
                                       {\normalfont\normalsize\bfseries}}
+{\def\subsubsubsection{\@latex@error{command 'subsubsubsection' not allowed}}
 \if@twocolumn
   \setlength\leftmargini  {2em}
 \else
@@ -483,6 +377,10 @@
                {\list{}{\labelwidth\z@ \itemindent-\leftmargin
                         \let\makelabel\descriptionlabel}}
                {\endlist}
+\newenvironment{myitemize}[1]{
+  \renewcommand{\labelitemi}{\ding{#1}}
+    \begin{itemize}}{\end{itemize}}
+
 \newcommand*\descriptionlabel[1]{\hspace\labelsep
                                 \normalfont\bfseries #1}
 \if@titlepage
@@ -504,7 +402,7 @@
         \begin{center}%
           {\bfseries \abstractname\vspace{-.5em}\vspace{\z@}}%
         \end{center}%
-        \quotation
+        %\quotation
       \fi}
       {\if@twocolumn\else\endquotation\fi}
 \fi
@@ -559,10 +457,9 @@
     }
 \fi
 \newcommand\appendix{\par
-  \setcounter{chapter}{0}%
   \setcounter{section}{0}%
-  \renewcommand\@chapapp{\appendixname}%
-  \renewcommand\thechapter{\@Alph\c@chapter}}
+  \setcounter{subsection}{0}%
+  \gdef\thesection{\@Alph\c@section}}
 \setlength\arraycolsep{5\p@}
 \setlength\tabcolsep{6\p@}
 \setlength\arrayrulewidth{.4\p@}
@@ -571,12 +468,9 @@
 \skip\@mpfootins = \skip\footins
 \setlength\fboxsep{3\p@}
 \setlength\fboxrule{.4\p@}
-\@addtoreset {equation}{chapter}
-\renewcommand\theequation
-  {\ifnum \c@chapter>\z@ \thechapter.\fi \@arabic\c@equation}
-\newcounter{figure}[chapter]
-\renewcommand \thefigure
-     {\ifnum \c@chapter>\z@ \thechapter.\fi \@arabic\c@figure}
+\renewcommand \theequation {\@arabic\c@equation}
+\newcounter{figure}
+\renewcommand \thefigure {\@arabic\c@figure}
 \def\fps@figure{tbp}
 \def\ftype@figure{1}
 \def\ext@figure{lof}
@@ -587,9 +481,8 @@
 \newenvironment{figure*}
                {\@dblfloat{figure}}
                {\end@dblfloat}
-\newcounter{table}[chapter]
-\renewcommand \thetable
-     {\ifnum \c@chapter>\z@ \thechapter.\fi \@arabic\c@table}
+\newcounter{table}
+\renewcommand\thetable{\@arabic\c@table}
 \def\fps@table{tbp}
 \def\ftype@table{2}
 \def\ext@table{lot}
@@ -602,13 +495,13 @@
                {\end@dblfloat}
 \newlength\abovecaptionskip
 \newlength\belowcaptionskip
-\setlength\abovecaptionskip{10\p@}
+\setlength\abovecaptionskip{0\p@}
 \setlength\belowcaptionskip{0\p@}
 \long\def\@makecaption#1#2{%
   \vskip\abovecaptionskip
-  \sbox\@tempboxa{#1: #2}%
+  \sbox\@tempboxa{#2}%
   \ifdim \wd\@tempboxa >\hsize
-    #1: #2\par
+    #2\par
   \else
     \global \@minipagefalse
     \hb@xt@\hsize{\hfil\box\@tempboxa\hfil}%
@@ -626,22 +519,16 @@
 \newcommand\@pnumwidth{1.55em}
 \newcommand\@tocrmarg{2.55em}
 \newcommand\@dotsep{4.5}
-\setcounter{tocdepth}{2}
+\setcounter{tocdepth}{3}
 \newcommand\tableofcontents{%
-    \if@twocolumn
-      \@restonecoltrue\onecolumn
-    \else
-      \@restonecolfalse
-    \fi
-    \chapter*{\contentsname
+    \section*{\contentsname
         \@mkboth{%
            \MakeUppercase\contentsname}{\MakeUppercase\contentsname}}%
     \@starttoc{toc}%
-    \if@restonecol\twocolumn\fi
     }
 \newcommand*\l@part[2]{%
   \ifnum \c@tocdepth >-2\relax
-    \addpenalty{-\@highpenalty}%
+    \addpenalty\@secpenalty
     \addvspace{2.25em \@plus\p@}%
     \begingroup
       \parindent \z@ \rightskip \@pnumwidth
@@ -649,14 +536,16 @@
       {\leavevmode
        \large \bfseries #1\hfil \hb@xt@\@pnumwidth{\hss #2}}\par
        \nobreak
+       \if@compatibility
          \global\@nobreaktrue
          \everypar{\global\@nobreakfalse\everypar{}}%
+      \fi
     \endgroup
   \fi}
-\newcommand*\l@chapter[2]{%
-  \ifnum \c@tocdepth >\m@ne
-    \addpenalty{-\@highpenalty}%
-    \vskip 1.0em \@plus\p@
+\newcommand*\l@section[2]{%
+  \ifnum \c@tocdepth >\z@
+    \addpenalty\@secpenalty
+    \addvspace{1.0em \@plus\p@}%
     \setlength\@tempdima{1.5em}%
     \begingroup
       \parindent \z@ \rightskip \@pnumwidth
@@ -665,45 +554,31 @@
       \advance\leftskip\@tempdima
       \hskip -\leftskip
       #1\nobreak\hfil \nobreak\hb@xt@\@pnumwidth{\hss #2}\par
-      \penalty\@highpenalty
     \endgroup
   \fi}
-\newcommand*\l@section{\@dottedtocline{1}{1.5em}{2.3em}}
-\newcommand*\l@subsection{\@dottedtocline{2}{3.8em}{3.2em}}
-\newcommand*\l@subsubsection{\@dottedtocline{3}{7.0em}{4.1em}}
-\newcommand*\l@paragraph{\@dottedtocline{4}{10em}{5em}}
-\newcommand*\l@subparagraph{\@dottedtocline{5}{12em}{6em}}
+\newcommand*\l@subsection{\@dottedtocline{2}{1.5em}{2.3em}}
+\newcommand*\l@subsubsection{\@dottedtocline{3}{3.8em}{3.2em}}
+\newcommand*\l@paragraph{\@dottedtocline{4}{7.0em}{4.1em}}
+\newcommand*\l@subparagraph{\@dottedtocline{5}{10em}{5em}}
 \newcommand\listoffigures{%
-    \if@twocolumn
-      \@restonecoltrue\onecolumn
-    \else
-      \@restonecolfalse
-    \fi
-    \chapter*{\listfigurename
+    \section*{\listfigurename
       \@mkboth{\MakeUppercase\listfigurename}%
               {\MakeUppercase\listfigurename}}%
     \@starttoc{lof}%
-    \if@restonecol\twocolumn\fi
     }
 \newcommand*\l@figure{\@dottedtocline{1}{1.5em}{2.3em}}
 \newcommand\listoftables{%
-    \if@twocolumn
-      \@restonecoltrue\onecolumn
-    \else
-      \@restonecolfalse
-    \fi
-    \chapter*{\listtablename
+    \section*{\listtablename
       \@mkboth{%
           \MakeUppercase\listtablename}{\MakeUppercase\listtablename}}%
     \@starttoc{lot}%
-    \if@restonecol\twocolumn\fi
     }
 \let\l@table\l@figure
 \newdimen\bibindent
 \setlength\bibindent{1.5em}
 \newenvironment{thebibliography}[1]
-     {\chapter*{\bibname
-        \@mkboth{\MakeUppercase\bibname}{\MakeUppercase\bibname}}%
+     {\section*{\refname}%
+      \small
       \list{\@biblabel{\@arabic\c@enumiv}}%
            {\settowidth\labelwidth{\@biblabel{#1}}%
             \leftmargin\labelwidth
@@ -730,7 +605,7 @@
                 \fi
                 \columnseprule \z@
                 \columnsep 35\p@
-                \twocolumn[\@makeschapterhead{\indexname}]%
+                \twocolumn[\section*{\indexname}]%
                 \@mkboth{\MakeUppercase\indexname}%
                         {\MakeUppercase\indexname}%
                 \thispagestyle{plain}\parindent\z@
@@ -745,7 +620,6 @@
   \kern-3\p@
   \hrule\@width.4\columnwidth
   \kern2.6\p@}
-\@addtoreset{footnote}{chapter}
 \newcommand\@makefntext[1]{%
     \parindent 1em%
     \noindent
@@ -753,12 +627,11 @@
 \newcommand\contentsname{Contents}
 \newcommand\listfigurename{List of Figures}
 \newcommand\listtablename{List of Tables}
-\newcommand\bibname{References}
+\newcommand\refname{References}
 \newcommand\indexname{Index}
 \newcommand\figurename{Figure}
 \newcommand\tablename{Table}
 \newcommand\partname{Part}
-\newcommand\chaptername{Chapter}
 \newcommand\appendixname{Appendix}
 \newcommand\abstractname{Abstract}
 \def\today{\ifcase\month\or
@@ -767,7 +640,7 @@
   \space\number\day, \number\year}
 \setlength\columnsep{10\p@}
 \setlength\columnseprule{0\p@}
-\pagestyle{plain}
+\pagestyle{headings}
 \pagenumbering{arabic}
 \if@twoside
 \else
@@ -782,7 +655,4 @@
 \fi
 \endinput
 %%
-%% End of file `report.cls'.
-
-
-
+%% End of file `ieeemag.cls'.

 

Close Window
 
  The service has been written by
Heinrich Stamerjohanns